-
Product DescriptionCompany Info.<>
- Brand:
- Shangwu Fluid
- Material:
- Stainless steel
- Performance:
- Explosion-proof
- Driving mode:
- Electric
- Allowable particle value:
- 2.5 mm
- Outlet pressure:
- 0.3 Mpa
- Lift:
- 30 m
- Flow:
- 3.5 m3/h
- Working pressure:
- 0.3
- Power:
- 1.5 kw
- Place of origin:
- China
- Model:
- DBY-25RL
The Shangwu Fluid DBY type turbine electric diaphragm pump is a conveying machinery that uses an electric motor as its power source. It can absorb various corrosive liquids, granular liquids, high viscosity, volatile, flammable, and highly toxic liquids with suction.
Product Features
1. With good performance, particles and mud with a diameter of less than 10 millimeters can pass through effortlessly.
2. Due to the separation of the conveying medium and transmission mechanical components by the diaphragm, the medium will not leak outward. And the pump itself has no shaft seal, greatly extending its service life.
3. Electric motors are divided into two types: ordinary and explosion-proof.
Applicable scenarios
1. Various highly toxic, flammable, and volatile liquids.
2. Various strong acids, strong alkalis, and highly corrosive liquids.
3. Can transport media with higher temperatures up to 120 ℃.
4. As a front-end pressure feeding device for various filter presses.
5. Hot water recovery and circulation.
6. Oil tanker trucks, oil depots, and oil loading and unloading.
7. Pump kimchi, jam, mashed potatoes, chocolate, etc.
8. Pump paint, gum, pigment adhesive.
9. Various types of rubber, latex, organic solvents, and fillers.
10. Use a pump to clean and extract sewage and residual oil from the oil tanker barge.
11. Hops and fermentation powder slurry, syrup, precision.
12. Pump sewage and sediment from mines, tunnels, tunnels, and sewers.
13. Suction and delivery of various special media.- Name(chinese)
- Name(English)
- Zhejiang Shangwu Fluid Technology Co., Ltd.
- China credit code
- Identity Verification
- Registered Capital
- 10,000,000 CNY
- Operating term
- 2018-03-13 ~ ****
- Address
-
Yongjia County, Wenzhou, Zhejiang, China
- Nearby port
- Wenzhou
The company mainly sells diaphragm pumps. Pneumatic diaphragm pumps can not only pump flowing liquids, but also transport some media that are difficult to flow. They have the functions of submersible pumps, self-priming pumps, impurities pumps, shielded pumps, mud pumps and many characteristics of conveying machinery. The flow is spacious and the passing performance is good, allowing passage of particles up to 10 mm. When pumping mud and impurities, there is little wear on the pump; No need for irrigation and water diversion, outlet pressure 7bar The pneumatic diaphragm pump has no rotating parts or shaft seals. The medium pumped by the diaphragm and other is completely separated from the moving parts of the pump and the workpiece media, and the medium transported will not leak out. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety; The pneumatic pump does not require oil lubrication, and even if it is idling, it will not have any effect on the pump. This is the characteristic of this pump.- Name(chinese)
- Name(English)
- Zhejiang Shangwu Fluid Technology Co., Ltd.
- China credit code
- Identity Verification
- Registered Capital
- 10,000,000 CNY
- Operating term
- 2018-03-13 ~ ****
- Address
-
Yongjia County, Wenzhou, Zhejiang, China
- Nearby port
- Wenzhou
The company mainly sells diaphragm pumps. Pneumatic diaphragm pumps can not only pump flowing liquids, but also transport some media that are difficult to flow. They have the functions of submersible pumps, self-priming pumps, impurities pumps, shielded pumps, mud pumps and many characteristics of conveying machinery. The flow is spacious and the passing performance is good, allowing passage of particles up to 10 mm. When pumping mud and impurities, there is little wear on the pump; No need for irrigation and water diversion, outlet pressure 7bar The pneumatic diaphragm pump has no rotating parts or shaft seals. The medium pumped by the diaphragm and other is completely separated from the moving parts of the pump and the workpiece media, and the medium transported will not leak out. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety; The pneumatic pump does not require oil lubrication, and even if it is idling, it will not have any effect on the pump. This is the characteristic of this pump. -
Send your message to this supplier*From:*To:
Mr. Owen
*Message:Inquiry
Copyright © 2003 - 2025 Goepe.com All rights reserved.